The market defects of the unified mixer truck are mainly reflected in the difference of the environment. The road conditions of the construction site and other places where the concrete mixer truck goes in and out are complex. Affected by the construction, the road is generally narrow and the road environment is not good. The average bicycle is OK. The semi-trailer is more difficult to drive and has a larger turning radius. It is not suitable for entering and leaving the construction site. Especially at the construction site, if it rains and the road is muddy, the semi-trailer is more likely to slip and sink.
The emergence of 2.6 party automatic loading mixer has solved these building construction problems. Automatic loading mixer is a multifunctional concrete loading mixer independently developed by Shandong Lutun machinery.
2.6 in order to ensure the normal operation process of our automatic feeding mixer, we need to check the equipment in advance. Next, let's find out what problems we need to check before the equipment runs.
1. Maintenance and inspection of battery: check whether the battery is fixed firmly.
2. Tire inspection: check the tire pressure at normal temperature every month.
3. Inspection of clutch: if the clutch liquid level is between high and low, it means normal. If it is lower than the standard line, there may be a problem with the leather cup of the master cylinder or slave cylinder.
4. Inspection of brake fluid level: if the brake fluid is between high and low, it indicates that it is normal.
5. Engine coolant level inspection: when the engine is in the policy state, do not open the radiator, which may be scalded by splashed coolant or high-temperature steam. After the engine cools down, check the position of the coolant level to see if distilled water or purified water or refrigerant needs to be added. The height after adding water shall not exceed the full position. If it is found that the coolant decreases rapidly in a short time, check the cooling equipment for leakage or go directly to the maintenance station.
2.6 the operating environment of the square material mixer is usually not very good, which also requires us to have a detailed understanding of the equipment before operation. The equipment can be operated and used only after it is ensured that there is no fault problem, so as to avoid various adverse problems that may exist in operation.